QwikFab 1.75mm ABS RepRap 3D printing filament is manufactured from the best of engineering grade raw material. Tight dimensional tolerances are kept to within +-0.05mm and consistency is maintained throughout and is compatible with MakerBot 3D printers and most RepRap and RepStrap 3D printers.
Please note that due to the material properties inherent within ABS, the material will shrink to about 2% after heat processing and requires a heated bed for operation to prevent warpage or curling.
3D printing of large parts while possible, requires advanced techniques such as the use of a controlled heated build chamber.
This product carries 1 Kg of plastic filament and has a total weight of 1.6 Kg.
Typical operating temperatures are between 235-255 degree celsius.
Please note that colors of images portrayed may vary due to your display brightness and color calibration.
|Effective Diameter||1.65 + / - 0.1 mm|
|Processing Temperature||235-255 Degrees Celcius|
|Primary Raw Pellet Type||ABS|
|Filament & Spool Weight||1.6kg or 3.53lbs|
|Filament Weight||1KG or 2.2lbs|